Russia

---

The Single Panel is a sandwich panel made of two galvanized electro-welded mesh, joined by connectors and by an appropriately shaped polystyrene sheet (EPS) of variable thickness according to specific architectural and insulation requirements. 
This insulated precast panel, subsequently completed onsite, is used for: - Main walls in structures completely made with panels, compatibly with the structural inspections and technical standards; - Main walls in structures with wooden roof or any other material;- Partition walls; - Infill walls of residential and commercial buildings; - Infill of prefabricated industrial buildings or castings 

The double panel is made of two single sandwich panels, assembled leaving an intermediate crawl space of variable thickness depending on the type of building and the required wall resistance.
These panels, prefabricated in the factory, are completed with concrete casting in the central crawl space: the double panel could therefore be defined as a disposable, insulating formwork, whose thickness of polystyrene (EPS) sheets varies according to the insulation requirements. Externally, the double panel is completed using traditional plaster. 
This insulated precast panel is mainly used for: - main walls in structures completely built with insulating panels; - main walls in structures with wooden roof or any other material. 

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting: a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. 
These insulated precast panels are used for: - floors of structures completely made with panels; - floors of buildings made with prefabricated structures, onsite castings or made with metal structure; - floors of prefabricated modules.

The stairs panel is made up of a suitably shaped polystyrene (EPS) sheet, wherein the riser and tread can vary according to the needs of the project. The polystyrene is covered by two electro-welded mesh joined by connectors. This prefabricated panel is reinforced and completed with concrete casting in the special ribs inside the EPS polystyrene. 

Polistop is a sandwich panel that integrates with the traditional structures made of two galvanized electro-welded mesh, joined by connectors, and a suitably shaped polystyrene (EPS) sheet; the sheet can have a variable thickness according to the architectural and insulation requirements. 
This precast insulating panel, subsequently completed on site, can be used for fast building and excellent insulation: - Infill walls of residential and commercial buildings;- Infill of prefabricated industrial buildings or on site castings;- Partition walls.